Metal Locker Door Panel Bending at Yuzhen
Video Description
Watch an operator position, rotate and bend a pre-cut metal panel during a locker door component manufacturing sequence at Yuzhen's factory.
Metal locker door panel bending is a multi-step process, not a single machine stroke. In this 58-second factory video, a Yuzhen operator guides a pre-cut rectangular panel through a sequence of press brake operations, repositioning and rotating the workpiece so different edges can be formed. The close view captures the hands-on coordination between the operator, support rests and bending tooling, while pre-cut holes, notches and developing flanges remain visible throughout the process.
This practical, step-by-step workflow highlights Yuzhen's in-house sheet-metal forming capability and the process discipline behind its metal storage components. Each controlled repositioning prepares a new edge for forming, gradually turning the flat panel into a structured door component for subsequent manufacturing stages. For buyers evaluating a school furniture supplier, the footage provides a direct look at real production activity rather than a showroom-only presentation.
Yuzhen Furniture was founded in 1991 and focuses on campus furniture for classrooms, nap spaces, dormitories, storage, seating and modular classroom use. Explore school lockers and storage cabinets or visit the Yuzhen factory for broader product and manufacturing context. This video focuses on the visible forming process; model-specific materials, dimensions and acceptance criteria are managed through the corresponding production and quality records.
FAQ
What does this metal locker door bending video show?
It shows an operator positioning a pre-cut rectangular metal panel at a press brake, bending an edge, withdrawing and rotating the component, and repeating the sequence for additional edges.
Does the footage confirm the exact locker door model or sheet specification?
No. The locker door application comes from the supplied production context, while the footage does not identify a product model, sheet grade, thickness, dimensions, bend angles or order.
Does this video prove the panel passed dimensional inspection?
No. The operator's bending and repositioning steps are visible, but tolerances, measurements, program settings and inspection acceptance require separate approved records.